|
Ergonomic, 37 inch working height. Electric blade and clamp drive. Electric back gauge drive with touchpad for easy programming. Front table digital display (cm or inches) with multilingual operator guidance. Digital display accurate to 1/10 mm or 1/100 inch. Stores 99 programs with up to 99 steps in each (up to 15 repeat cuts can be integrated as a single step). Pre-programmed for standard paper sizes.
Memory key for repeat cuts. Automatic SET function for reference measurement and EJECT function for pushing out paper. Self-diagnostic system with error indication on display. Electronic hand wheel with variable speed control for manual back gauge setting. Bright, LED optical cutting line. 3-step, LED front table illumination; Adjustable, spindle guided back gauge with narrow separations and plastic gliders. Dual side guides on front and rear tables. High quality, German steel blade. Solid steel blade carrier and adjustable blade guides. All-metal construction. Includes stand with storage shelf, easy-access tool holder, and paper blocking tool. Optional side tables increase work surface.
Cut Length: | 25 1/2" inches |
Capacity: | 3" |
Type: | Electric |
Narrow Cut: | 1" |
Depth Behind Knife: | 24" |
Motor: | 2 HorsePower |
Size: | 48" D x 39" W x 51" H (61 1/2" W with side tables) |
Warranty: | 1 Year |
Power: | 115 V, 60 Hz (20 amp dedicated line required) |
Shipping Weight: | 775 lbs. (795 lbs. with side tables) Pounds |
![]() 3/4" Colored Aluminum Extensions $14.99 |
![]() 1" Colored Aluminum Extensions $34.81 |
![]() 3/16" Colored Aluminum Screw Posts $30.28 |
![]() VersaBind-Ei Electric Punch and $2,399.00 |
![]() Onyx HD7500 Horizontal Wire, Comb $6,179.00 |
1 x PIN 1GMM0019703AZ | $122.28 |
1 x FD 390 Paper Folder | $8,350.00 |
1 x TBD - NUT HEX 1/2-20 | $23.68 |
1 x PowerHouse PF17 Paper Folder | $999.00 |
1 x Duplo DF 920 Paper Folder | $5,300.00 |
1 x SPRING WASHER 1/4X1/2 FORMED | $22.55 |
1 x DE-202AF Paper Folder | $1,359.00 |
1 x DF 755 Paper Folder | $2,500.00 |
1 x Powerhouse PF17V Paper Folder | $1,299.00 |
1 x GRIND 2ND ROLLER | $119.44 |
1 x Count Complete Micro Perfing Assembly | $289.50 |
1 x Model 160 Stock Truck DISCONTINUED | $490.00 |
1 x BLANK 26" COMPONENT | $285.47 |
1 x 6.5mm Euro Standard Hollow Drill Bit | $24.98 |
1 x Harris 532 Bottom Front Cutting Knife | $438.00 |
1 x 8mm Euro Standard Hollow Drill Bit | $34.98 |
1 x PIN SERVICE KIT W3 RCT | $65.64 |
1 x Breakaway Neck Lanyards | $34.95 |
1 x SuperKote 42 Footage Counter | $370.00 |